г. Санкт-Петербург,
пер. Ульяны Громовой, д. 4
Время работы: с 9-00 до 21-00
8 (812) 385-56-15 Звонок по России бесплатный info@fgrus.ru

Grommet DL 1/3/5/10/50E, IP 42 Kromschroder

Артикул
Grommet DL 1/3/5/10/50E, IP 42
Дополнительный Артикул
GrommetDL1351050EIP42
Бренд
Kromschroder
Описание
Запасная часть
Цена
253 руб.
Вес
0,01 кг
Теги
Grommet

Узнайте актуальную цену данного товара

Оставьте свой E-mail и наш менеджер ответит вам в течение 15 минут

Доставка от 3 до 10 дней

из Европы Америки и Азии

Гарантия 12 месяцев

на всё оборудование, включая б/у

Можем поставить редкое и снятое

с производства оборудование

Более 5000 брендов

поставим под заказ

Похожие товары

Артикул: DL 10KH-3
Бренд: Kromschroder
Описание: для monitoring air and flue gas pressures, для positive pressure, negative pressure and differential pressure, EU certified · Adjusting range: 1.0-10 mbar, can be used as ''special-design pressure switch'' · Разъем with tube connection and hand wheel · Locks off with rising pressure · Electrical connection via screw terminals Запасная часть
Подробнее
Артикул: Test nipple G 1/4 P aluminium + Viton /B
Бренд: Kromschroder
Описание: Запасная часть
Подробнее
Артикул: VGBF 100TA10-3
Бренд: Kromschroder
Описание: Spring-loaded, with inlet pressure compensation diaphragm and zero shut-off, to maintain a constant set pressure of the gas supply to gas burners and gas appliances · DN 100 · ANSI flange · pu max. 14.5 psig (1 bar) · Screw plug at the inlet and outlet Запасная часть
Подробнее
Артикул: PFA 710N
Бренд: Kromschroder
Описание: для interworking of up to eight automatic burner control units PFU 780 to PROFIBUS DP. The PFA 710 is integrated in the ready-wired модуль subrack BGT. This combination complies with the Low Voltage Directive (2006/95/EC) and the EMC Directive (2004/108/EC). Integrated power supply для the bus interface and the inputs of the automatic burner control units, code switches для addressing the fieldbus interface. · Series 710 · Mains voltage: 110/120 V AC, 50/60 Hz Запасная часть
Подробнее
Артикул: GDJ 40R04-4
Бренд: Kromschroder
Описание: Spring-loaded, with inlet pressure compensation diaphragm and zero shut-off, no purge line required, to maintain a constant set pressure · DN 40 · Rp internal thread · pu max. 400 mbar · Pressure test point at the inlet · для gas, EU certified · Set to 20 mbar Запасная часть
Подробнее
Артикул: FCU 500QC1F2H1K2-E
Бренд: Kromschroder
Описание: Разъем для control cabinet installation, для monitoring and controlling central safety functions in multiple burner systems on industrial furnaces, long service life due to replaceable power модуль для fail-safe outputs. Display of the program status, unit parameters and flame signal. Manual operating mode. Diagnosis and adjustment of unit parameters via optical interface using PC software BCSoft. EC-type tested and certified, CSA and FM approved, certified для systems up to SIL 3 (compliant with PL e). · Series 500 · Mains voltage: 120 V AC, 50/60 Hz · With integrated tightness control or POC · Modulating capacity control with interface для RBW · With temperature monitoring · Spring дляce connection terminals · EU certified, CSA and FM approved, certified для systems up to SIL 3 (compliant with PL e) · Individual packaging · 10 Emergency stop with fault lock-out · 12 High gas pressure protection with fault lock-out · 13 Low pressure cut-off with fault lock-out · 15 Air deficiency cut-out with fault lock-out · 19 Safety time during operation: 1 s · 20 Maximum temperature monitoring using safety temperature limiter (STL) · 22 Type K double thermocouple NiCr-Ni · 23 Temperature difference limit value: 50°C · 24 Lower limit для high temperature operation: 750°C · 25 Upper limit of the furnace or flue gas temperature: 1000°C · 26 Temperature hysteresis: 50°C · 27 Pre-purge during high temperature operation · 29 Fan switched on in the event of fault · 30 Fan run-up time tGV: 10 s · 31 Fault lock-out if fan not running · 32 Air flow monitoring during controlled air flow off, valve opens · 34 Pre-purge time tPV: 180 s · 35 Air flow monitoring during pre-purge with fault lock-out · 37 Post-purge time tPN: 0 s · 38 Post-purge: actuator (if there is one) moves to the OPEN position and the air flow is not monitored. · 40 Capacity control with RBW · 41 Selection of RBW running time: HIGH and LOW feedback is not queried. · 42 RBW running time: 30 s · 44 Controller enable signal delay time tRF: 10 s · 45 Minimum enable time: 0 s · 46 After operating signal: controller enable · 47 Controller enable (timeout): 1 min. · 51 Valve proving system: tightness test beдляe start-up · 53 Tightness control test volume: Vp, venting via V3 · 54 Tightness control: pressure reduction Vp2 in standyby · 55 Relief valve V3 opening time (tL3): 0 s · 56 Measurement time Vp: 15 s · 57 Measurement time Vp1 + Vp2: 10 s · 58 Measurement time Vp1 + Vp2 + Vp3: 3600 s · 59 Valve opening time V1 (tL1): 3 s · 60 Valve opening time V2 (tL2): 2 s · 62 Minimum pause time tfP: 0 s · 63 Switch-on delay time tE: 0 s · 65 Filling time beдляe start-up: 0 s · 67 Operating time in Manual mode limited to 5 min. · 69 Function of terminal 51: RBW High position feedback · 72 Function of terminal 67: fault lock-out if no signal from automatic burner control unit · 77 User-defined password Запасная часть
Подробнее

Ваша заявка принята